I need to get rid of some of my extras so I thought I would offer these:
I've designed a small add on board to give the SL40 a remote flip/flop. The board mounts in place of the 15 pin d-sub on the tray and then the original connector can be plugged into the board. One wire needs to be added to the original connector on a unused pin and when that wire is taken to ground the radio will flip/flop. If the flip-flop button is held in for a couple seconds, 121.5 will be loaded into the standby frequency. External devices can still load frequencies.
I had enough boards made to make 20 of these. I can sell them for $125. You have your choice of a straight or right angle connector on the input side.
PM me here or email me at [email protected] if you're interested.
https://www.youtube.com/watch?v=84Bnehu5cto
Thanks,
I've designed a small add on board to give the SL40 a remote flip/flop. The board mounts in place of the 15 pin d-sub on the tray and then the original connector can be plugged into the board. One wire needs to be added to the original connector on a unused pin and when that wire is taken to ground the radio will flip/flop. If the flip-flop button is held in for a couple seconds, 121.5 will be loaded into the standby frequency. External devices can still load frequencies.
I had enough boards made to make 20 of these. I can sell them for $125. You have your choice of a straight or right angle connector on the input side.
PM me here or email me at [email protected] if you're interested.
https://www.youtube.com/watch?v=84Bnehu5cto
Thanks,
