I've be chasing an AP altitude hunting issue for a while, i won't bore you all with the details, but I will say it's caused me a phenomenal amount of frustration trying to fix it, more so because for the first 30 hours of my aircrafts life the AP worked faultlessly. Additionally, I can trick the AP into holding altitude by trimming in 3 clicks of pitch trim.
Today I decided to check for slop in the linkages, once again. All my linkages are good ( no slop) not surprising since my aircraft is new 100hrs TTIS, however on closer inspection of the AP Servo arm I found some slop.
I'm guessing (hoping) that this amount of slop is unacceptable ??
http://www.youtube.com/watch?v=g2zZxFoLaj0&sns=em
Today I decided to check for slop in the linkages, once again. All my linkages are good ( no slop) not surprising since my aircraft is new 100hrs TTIS, however on closer inspection of the AP Servo arm I found some slop.
I'm guessing (hoping) that this amount of slop is unacceptable ??
http://www.youtube.com/watch?v=g2zZxFoLaj0&sns=em