f14av8r
Well Known Member
I need to replace my lower engine mounts due to deterioration from oil exposure. I'm considering replacing the lower mounts with Barry mounts and leaving the upper Lord mounts in place. I'm also considering replacing all four with Barry. I'm also considering replacing just the lower mounts with Lord mounts that match the upper ones.
Here's my main question. If I replace all four Lord mounts with the Barry mounts that Vans sells for the RV-8, will the be close enough dimensionally so as to not effect my cowl installation and clearances?
Here's my main question. If I replace all four Lord mounts with the Barry mounts that Vans sells for the RV-8, will the be close enough dimensionally so as to not effect my cowl installation and clearances?