VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 07-28-2020, 12:25 AM
DylanRush DylanRush is offline
 
Join Date: Apr 2020
Location: Seattle, WA
Posts: 50
Default Loose screw threadings

The fiberglass wheel pants on my 6A are held together with about a dozen screws. Got a flat tire, fixed it, then a few weeks later I noticed a couple were missing. I got some replacements from my mechanic and flew for a bit. Noticed they were missing again about a week later.

I am guessing that the threaded holes that they are screwing into have become loose. So I bought some epoxy thinking maybe I can gunk it up and create a tighter connection? My plan was to apply a little epoxy to the hole, screw a screw in, wait a minute, unscrew it, then wait 5-20 minutes.

Am I setting myself up for failure? I’m a little afraid that the epoxy will permanently trap the screws there. They do need to be able to come off in order to get to the wheels. Also do you think I should drill it out first to “clean it up”?
Reply With Quote
  #2  
Old 07-28-2020, 12:56 AM
BobTurner BobTurner is offline
 
Join Date: Dec 2011
Location: Livermore, CA
Posts: 7,356
Default

This might work. Spray the screws with your wife’s hairspray so the epoxy won’t stick to them. A better plan would be to fill the holes with a mixture of epoxy and flox. Let dry, re-drill, tap.
Reply With Quote
  #3  
Old 07-28-2020, 05:06 AM
fixnflyguy fixnflyguy is offline
 
Join Date: Jan 2006
Location: Winston-Salem, N.C.
Posts: 1,377
Default A couple things

I assume your screwing into a machine thread nutplate which when new, is a self locking crimped thread or nylon locknut type. They will only handle so many in-out repetitions before requiring replacement. Use of a screw gun only accelerates the thread wear. The best solution it to replace the nutplates at sometime soon. In the mean time, install them with "red" Loktite or paint the screw threads with clear nail polish and install them quickly.
__________________
Bill E.
RV-4/N76WE
8A7 / Advance NC
Reply With Quote
  #4  
Old 07-28-2020, 05:17 AM
BillL BillL is offline
 
Join Date: Sep 2007
Location: Central IL
Posts: 5,895
Default

Make sure the screws are long enough to get though the nut plates. You can slightly squeeze the aft part of the nut plates to firm up the locking feature until they can be replaced.

Are you using tinnermans under the screws? I assume you are.
__________________
Bill

RV-7
Lord Kelvin:
“I often say that when you can measure what you are speaking about,
and express it in numbers, you know something about it; but when you
cannot measure it, when you cannot express it in numbers, your knowledge
is of a meager and unsatisfactory kind.”
Reply With Quote
  #5  
Old 07-28-2020, 11:45 AM
DylanRush DylanRush is offline
 
Join Date: Apr 2020
Location: Seattle, WA
Posts: 50
Default

Thanks for the advice all. I'll go back and check whether I have a Tinnerman on the other side or a machine thread nut plate.

fixnflyguy, would I still be able to remove them if I use the red loctite?
Reply With Quote
  #6  
Old 07-28-2020, 12:02 PM
RV7A Flyer's Avatar
RV7A Flyer RV7A Flyer is offline
 
Join Date: Jul 2013
Location: US
Posts: 2,414
Default

Quote:
Originally Posted by DylanRush View Post
Thanks for the advice all. I'll go back and check whether I have a Tinnerman on the other side or a machine thread nut plate.

fixnflyguy, would I still be able to remove them if I use the red loctite?
Probably not. If you want to remove them, use BLUE loctite.

You might as well go ahead and replace the nutplates and quit wasting time with other temporary fixes. It's an easy job.

Tinnerman washers go on the *outside*, under the screw head, btw. We're not talking about Tinnerman *nuts* in this context.

__________________
2019 Dues paid!

Last edited by RV7A Flyer : 07-28-2020 at 12:04 PM.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 07:18 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.