I don't have the drawing number handy, but until I do, I'll plant this reminder post....
The drawing for the elevator push rods shows the rod between the stick and the bell crank to be 49 1/2" (ref). I ended up with 48 1/2"....so your mileage may vary, and that is why it is labeled as "ref". Don't be surprised if yours is a different length, and measure carefully!
Paul
__________________
Paul F. Dye
Editor at Large - KITPLANES Magazine
RV-8 - N188PD - "Valkyrie"
RV-6 (By Marriage) - N164MS - "Mikey"
RV-3B - N13PL - "Tsamsiyu"
A&P, EAA Tech Counselor/Flight Advisor
Dayton Valley Airpark (A34)
http://Ironflight.com
|
Threaded Mode