VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
w/a Donation






VAF on Twitter:
@VansAirForceNet

  #1  
Old 05-15-2023, 06:52 AM
benjam benjam is offline
 
Join Date: Mar 2019
Location: Brisbane, Australia
Posts: 50
Default Canopy frame mis-align

Hi Vans Fans,

I am trying to fit the canopy frame to a regular QB fuse.

It all looks mostly good. Slides well, seems straight, is laterally symmetrical. Right up until it gets to the windscreen bow. At that point the left forward side is about 1/4Ē closer to the bow. Left edge sits about 1/2Ē away, while the right corner is 3/4Ē. I havenít tried to shape the handle latch yet. The pin at the rear is nicely engaged.

Is 1/4 inch a deal breaker? Can it be improved? Iíve tried manipulating the frame, but there doesnít seem to be much change (and I donít want to wreck it!).

Any opinions would be appreciated.

Cheers
__________________
Trying to keep the QB fuse build progressing...
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:09 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.