I am doing my conditional and cable tension check is on the list. The maintenance manual emphasizes that the hangar temperature should be 70f for the test, if not the tension measurement will "change significantly".
My hangar is at 105f and I am getting a reading of 55 lbs, and the manual says I want 35-45 lbs.
Is there a conversion chart for higher hangar temps. I am in CA and it is hot this time of year.
My hangar is at 105f and I am getting a reading of 55 lbs, and the manual says I want 35-45 lbs.
Is there a conversion chart for higher hangar temps. I am in CA and it is hot this time of year.