Hi, I removed one of my tanks to replace the sender. The screws were triwing security screws and were very hard to remove. I decided not to reuse those screws and buy replacements.
I searched on Van's forums to see what # screw I should use. The recommended screw was AN509-8R8 or MS24694-S5.
When I received the screws they were different than what was in my tanks. The screws that came out of my tank were 10-32 reduced head screws.
I believe my tanks were built mid 1990s.
Does anyone know if this type screw was used in the past and have a part number or where I might purchase some?
When I tried a standard 10-32 screw in the tank, the head protruded slightly, while the reduced head screws were flush.
Thanks for any help/advice.
Ken W
I searched on Van's forums to see what # screw I should use. The recommended screw was AN509-8R8 or MS24694-S5.
When I received the screws they were different than what was in my tanks. The screws that came out of my tank were 10-32 reduced head screws.
I believe my tanks were built mid 1990s.
Does anyone know if this type screw was used in the past and have a part number or where I might purchase some?
When I tried a standard 10-32 screw in the tank, the head protruded slightly, while the reduced head screws were flush.
Thanks for any help/advice.
Ken W