Just a heads up, I am doing my CI and was putting a wrench on everything on the engine to check tightness. Found the fuel pump mounting nuts loose. Visually, they looked secure but the top was a 1/2 turn loose and the bottom was 1 turn loose. Retorqued and applied torque stripe.
Also, I found the lower bracket (attaches to the top of the generator) that supports the ignition modules/coils broken. The bottom coil was chafing into the engine mount. Luckily it only chafed through the paint.
Also, I found the lower bracket (attaches to the top of the generator) that supports the ignition modules/coils broken. The bottom coil was chafing into the engine mount. Luckily it only chafed through the paint.
Last edited: