VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #461  
Old 05-08-2017, 03:44 PM
BobTurner BobTurner is offline
 
Join Date: Dec 2011
Location: Livermore, CA
Posts: 7,355
Default

Isn't the Dynon transponder actually manufactured by Trig?
Reply With Quote
  #462  
Old 05-08-2017, 03:53 PM
az_gila's Avatar
az_gila az_gila is offline
 
Join Date: Jan 2005
Location: 57AZ - NW Tucson area
Posts: 10,011
Smile

Quote:
Originally Posted by BobTurner View Post
Isn't the Dynon transponder actually manufactured by Trig?
Yes, but I didn't see that as an option either...
__________________
Gil Alexander
EAA Technical Counselor, Airframe Mechanic
Half completed RV-10 QB purchased
RV-6A N61GX - finally flying
Grumman Tiger N12GA - flying
La Cholla Airpark (57AZ) Tucson AZ
Reply With Quote
  #463  
Old 05-08-2017, 04:19 PM
dynonsupport's Avatar
dynonsupport dynonsupport is offline
 
Join Date: Jun 2005
Location: Woodinville, WA
Posts: 1,499
Default

Gil,
I just checked and Dynon is on the pull down, and as far as we knew, has been for a long time. What page are you at where you can't find it?

You are supposed to enter Dynon, not Trig. Our transponder has a unique part number.

https://adsbperformance.faa.gov/PAPRRequest.aspx
__________________
_______________________
Dynon Avionics
support@dynonavionics.com
425-402-0433
www.DynonAvionics.com
Reply With Quote
  #464  
Old 05-08-2017, 06:37 PM
GalinHdz's Avatar
GalinHdz GalinHdz is offline
 
Join Date: Mar 2010
Location: KSGJ / TJBQ
Posts: 2,191
Default

Quote:
Originally Posted by keijidosha View Post
I flew this morning and just requested a report. I'm pretty sure this is a new question as I don't remember answering it in the past;

"Please provide the Installer of your ADS-B OUT Equipment. ADS-B OUT Equipment Installer
*Installer Category:
Repair Shop
Airframe Powerplant Mechanic
Factory Installed
Self Installed - Experimental
Self Installed - Light Sport
Not Known
[*Denotes required input.]"

Repair Shop, Mechanic ask for State, City, and Shop/Mechanic name.

FWIW, my report came back No Exceptions, as usual.
WAY before that point on the FAA page, you need to pick which ADS-B OUT Data link(s) you have. If you have a DYNON, select 1090ES which is what their transponder's frequency. THEN you can select DYNON under <MANUFACTURER>. DYNON does not manufacture a UAT unit so if you select that option, it doesn't show up.

REMEMBER the FAA is only interested in ADS-B OUT, they don't care about ADS-B IN.

__________________
Galin
CP-ASEL-AMEL-IR
FCC Radiotelephone (PG) with Radar Endorsement
2021 Donation made
www.PuertoRicoFlyer.com

Last edited by GalinHdz : 05-08-2017 at 08:16 PM.
Reply With Quote
  #465  
Old 05-09-2017, 07:34 AM
phobos_49 phobos_49 is offline
 
Join Date: Aug 2006
Location: Hicks (T67)
Posts: 62
Default

If you're configuration is set to "anonymous " the FAA system can't find your record and will not generate a report.
Reconfigure to show your N number and you should get a report in minuets.
__________________
Jarhead
RV-8, Formation flight
SMOKE ON
Reply With Quote
  #466  
Old 05-09-2017, 11:05 AM
BobTurner BobTurner is offline
 
Join Date: Dec 2011
Location: Livermore, CA
Posts: 7,355
Default

Quote:
Originally Posted by phobos_49 View Post
If you're configuration is set to "anonymous " the FAA system can't find your record and will not generate a report.
Reconfigure to show your N number and you should get a report in minuets.
Since he's talking about a mode S-ES transponder, "anonymous" is not an option.
Reply With Quote
  #467  
Old 05-09-2017, 01:52 PM
Billvt's Avatar
Billvt Billvt is offline
 
Join Date: Dec 2010
Location: Fairfax, VT
Posts: 66
Default

Jarhead was correct.

My Navworx ADS600-EXP was in the stealth mode.

I had switched to that mode a few months ago and had forgotten about it.

Problem of no ADS-B reports, solved.

Bill
__________________
Bill Morelli - A&P I/A - EAA Tech Counselor
Up North Aviation
CNC Instrument Panel Fabrication
Web www.upnorthaviation.com
E-Mail upnorthaviation@gmail.com
- RV-4 build in progress !!!
Reply With Quote
  #468  
Old 05-09-2017, 02:04 PM
roadrunner20's Avatar
roadrunner20 roadrunner20 is offline
 
Join Date: Feb 2005
Location: Bay Pines, FL, building in Andrews, NC (new base @ KRHP)
Posts: 1,957
Default

Navworx has updated their website.
See my new thread.
http://www.vansairforce.com/communit...hlight=Navworx
__________________
Danny "RoadRunner" Landry
Morphed RV7(formally 7A), N20DL, PnP Pilot
1200+ hours
Reply With Quote
  #469  
Old 05-11-2017, 03:24 PM
Swoda Swoda is offline
 
Join Date: Nov 2016
Location: McAlpin, FL
Posts: 33
Default Regulations.gov

The following is a link to a new letter from the FAA Manager of the Helicopter Directorate on the Status of the NAVWORX NPRM. It was posted yesterday.

https://www.regulations.gov/document...2016-9226-0203
__________________
Ron Greene
CWO4, U.S. Navy, Retired
RV-6A N57BZ
RANS S-6ES N75798
Taylorcraft L-2 N55049
Reply With Quote
  #470  
Old 05-13-2017, 09:50 PM
GalinHdz's Avatar
GalinHdz GalinHdz is offline
 
Join Date: Mar 2010
Location: KSGJ / TJBQ
Posts: 2,191
Default

WOW, this thread has over 101,000 views and 475 posts in less than 7 months.
__________________
Galin
CP-ASEL-AMEL-IR
FCC Radiotelephone (PG) with Radar Endorsement
2021 Donation made
www.PuertoRicoFlyer.com

Last edited by GalinHdz : 05-13-2017 at 09:55 PM.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:02 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.