VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

Prev Previous Post   Next Post Next
  #1  
Old 02-18-2013, 05:41 PM
tkatc's Avatar
tkatc tkatc is offline
 
Join Date: Nov 2007
Location: NJ
Posts: 1,747
Default MT prop spitting grease after overhaul

My MT metal c/s prop (MTV-15) was spitting grease at around 250 hours ttsn. Calendar months suggested an overhaul vs a re-seal so I bit the bullet and had it overhauled by an MT authorized prop shop. It wasn't cheap! Here we are 18 months later and the prop is spitting grease again, 135 hours smoh.

I LOVE this prop and it always works flawlessly but black grease on a bright yellow cowl is certainly disturbing. I dropped off the plane to the same prop shop...I wrote MT an email expressing my concerns and told them I expect them to cover the repair even though I am past the 12 month warranty after the overhaul. This thing only has 135 hours on it! And I noticed the leak about 10 hours ago, so that 125! Obviously I am bummed out. We'll see if MT steps up to the plate or not..... Stay tuned!



__________________
My ATC opinion is NOT an official FAA recognized opinion, so any advice you get from me is ONLY my opinion.

Track my RV7A!!

Bought my flying -7A
Building an -8! (Fuse)
Reply With Quote
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 03:57 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.