I'm finishing up a 320 to 360 engine swap and have a question. I switched from a fixed pitch to a Hartzell CS during the swap and when I was running the fixed pitch I built out the cowl openings a little to hopefully catch some more air off the prop and help cooling. Now with the CS Im concerned I may have some clearance issues when the prop goes full course. It appears right now I only have about 3/4" distance between the trailing edged of the propeller and the leading edge if the cowl cooling intakes with the propeller in fine pitch. Is that enough? What clearances are standard with a hartzell cs propeller? Could someone measure theirs and let me know? Thx!!!