Learning the new system, and it seems like this isn't an option. On the G1000 and 650/750 navigators, when you load/activate an approach, on the flight plan page, you get the altitude for your waypoints. On the 375, that isn't an option for the data fields. The only data field with altitude info is the enroute safe altitude, and that's not very helpful during an approach. This leaves me with no vertical guidance unless I pull up the plate on the MFD. How I was taught on the G1000 was to use the full PFD for situational awareness and scanning, and split the MFD on the moving map and the flight plan. It seems like this screen setup isn't possible with the 375 unless I'm willing to also have an Ipad on my lap with additional approach info. I can't even find a way to display that info on the G3X, it seems like its just not a valid output. Am I missing something, or is this really a limitation of the 375? Thanks.