AJPope
Member
There have been several discussions prop levers moving forward when the throttle friction is loosened. Some have had luck with the longer Hartzell control arm. I have an MT governor and received no reply when contacting them. Everyone’s good buddy, Squaz, suggested a spring on the prop lever going back to the bulkhead. The angle bracket attached nicely to an existing bolt with a nutplate behind it. Works like a champ! (Turns out I didn’t need to remove the top panel on the throttle quadrant.)
https://n990bv.smugmug.com/Falcon-RV-Squadron/i-b6SrPCV
https://n990bv.smugmug.com/Falcon-RV-Squadron/i-9DsCRpg
https://n990bv.smugmug.com/Falcon-RV-Squadron/i-C6TbGgb
https://n990bv.smugmug.com/Falcon-RV-Squadron/i-b6SrPCV
https://n990bv.smugmug.com/Falcon-RV-Squadron/i-9DsCRpg
https://n990bv.smugmug.com/Falcon-RV-Squadron/i-C6TbGgb
Last edited: