My 650 Comm radio is not showing up on my G3X screen. I will get a 'RX' indicator when I tuned the radio directly on the 650 to the local ASOS, and I get TX indicator as well as carrier only when I try to transmit on that radio.
My set up;
GTN 650Xi (Navigator & Comm 1)
GDU 460 (G3X screen)
GTR-20 remote radio (Comm 2)
GMA 245 (Intercom)
My wiring diagram was done by SteinAir. I have double checked and I have pins in all the correct places, as to whether the correct pins are in the correct place I am going to check next, but I was hoping someone might have had this issue and can help me narrow down my search.
I am assuming I have pins crossed somewhere but is it possible I have my set up incorrect on the G3X.
My set up;
GTN 650Xi (Navigator & Comm 1)
GDU 460 (G3X screen)
GTR-20 remote radio (Comm 2)
GMA 245 (Intercom)
My wiring diagram was done by SteinAir. I have double checked and I have pins in all the correct places, as to whether the correct pins are in the correct place I am going to check next, but I was hoping someone might have had this issue and can help me narrow down my search.
I am assuming I have pins crossed somewhere but is it possible I have my set up incorrect on the G3X.