Was just refitting cabin top after sanding overhead and realized I may have to use pulled rivets at the point where cabin top/overhead meets aft skin. Is there a layer of glass that should be laid to cover the forward row of rivets?
Was just refitting cabin top after sanding overhead and realized I may have to use pulled rivets at the point where cabin top/overhead meets aft skin. Is there a layer of glass that should be laid to cover the forward row of rivets?
I had to do the same thing. I also installed the vents tubes in advance, which were in the way of 4 rivets, so I used some cherry max 3/32 in those areas also.