Stockmanreef
Well Known Member
SO I am trying to assemble the stall horn today and can't find the washers. I finally look at the packing list to find 30 of the large washers in the attached picture and none of the correct washers. The small washers were the supposed to be NAS1149FN432P. So now I have a bunch of washers of unknown size.
I happen to have purchased a bunch of random nuts bolts and washers from the yardstore. I would like to know if the one I am using are a good substitute. They are labeled AN960-4. I also have AN960-4L. I think that the latter are too thin and would take a lot more washers to stall horn assembled.
It worries me a bit when the correct parts are not in the bags.
I happen to have purchased a bunch of random nuts bolts and washers from the yardstore. I would like to know if the one I am using are a good substitute. They are labeled AN960-4. I also have AN960-4L. I think that the latter are too thin and would take a lot more washers to stall horn assembled.
It worries me a bit when the correct parts are not in the bags.