VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 05-10-2022, 04:04 PM
AviatorJ AviatorJ is offline
 
Join Date: Feb 2015
Location: Oklahoma City
Posts: 998
Default Shop ‘requirements’

While I have the experience of slamming together a 10, I have the opportunity to get a new garage/shop customized to my liking. Below is what I already am thinking but looking for additional things to contemplate.

* 24x30 detached garage, with loft - this is about all that will fit in the space.
* 8’ garage door - my 10 barely fit under my door so going taller.
* Sprayfoam insulation - have it on my current garage which really help keep the space workable.
* mini split unit - workable is still hot Or cold depending on season. Instead of using my portable AC or heater this will work for climate control.
* 220 volt - I want a larger compressor that runs 220.
* hard-mount compressor lines - instead of wrangling with the lines.
* LED lighting - Those generic Overhead lights aren’t the best. I used stand lighting on my 10.
* built in cabinets - I’ll build these myself and have space for all my existing stuff.
* shelving - Wide deep shelves for parts are a must have.
* wifi - Plan to put an AP out there
* Solid color epoxy floor - I want to protect the floor without having it camouflage dropped bolts, screws, ect.
* ventilation - need something to ventilate, still need to research some options.
* cameras - I have something like 8 cameras on my house. What’s a few more.

That’s about what I got now. Any input would be appreciated!
__________________
Justin
RV-10, N10JW
Flying since 2/14/2019
http://operationrv10.blogspot.com/
Reply With Quote
  #2  
Old 05-10-2022, 04:54 PM
azonic75 azonic75 is offline
 
Join Date: Dec 2010
Location: Salem, OR
Posts: 135
Default exhaust fan and more

I'd want an exhaust fan in an area that I would use for painting/priming/sanding fiberglass and maybe the ability to close off this area


A good vacuum system making it easy to clean up

A big sink

Couple of extension cords on reels

Consider a floor drain
__________________
RV-8a Flying
RV-10 Building
J-5A Flying
Extra 300 flying
Reply With Quote
  #3  
Old 05-10-2022, 05:52 PM
wirejock's Avatar
wirejock wirejock is offline
 
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 5,212
Default Joist winch

As long as your making a list.
Add a joist winch. A friend of mine had one. So handy. Just roll it over and winch whatever up and out.
__________________
Larry Larson
Estes Park, CO
wirejock at yahoo dot com
Donated 12/01/2021, plus a little extra.
RV-7A #73391, N511RV reserved (3,000+ hours)
Empennage, wings, fuse, finishing kit done. Working FWF
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote
  #4  
Old 05-10-2022, 06:05 PM
Mike S's Avatar
Mike S Mike S is offline
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 16,337
Default

Bathroom...
__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
  #5  
Old 05-10-2022, 06:16 PM
YellowJacket RV9 YellowJacket RV9 is offline
 
Join Date: Oct 2012
Location: Clearwater, FL KCLW
Posts: 1,360
Default

Running water, bathroom, floor drain. Dirty floors drive me nuts, would love to be able to rinse mine down. Like the winch idea also.
__________________
Chris Johnson
RV-9A - Done(ish) 4/5/16! Flying 4/7/16
Reply With Quote
  #6  
Old 05-10-2022, 06:57 PM
MJarreau MJarreau is offline
 
Join Date: Apr 2007
Location: LA (Lower Alabama)
Posts: 360
Default Paint Booth

Dan Horton has an amazing shop (any surprise there?). If I recall correctly, there are pictures somewhere on this site which show a wall of filters floor-to-ceiling that he could install, or remove as needed. He had a double filtered exhaust air box on either side of the garage door with a squirrel cage fan in each.

Enjoy the new shop!

Mike
__________________
DUES REMINDER: JAN 2023

RV-10
Tailcone: 90%
Wings: In Progress!
Fuse: Ordered
Finish: Ordered
FWF: Ordered
Engine: Ordered
Prop: Ordered
Reply With Quote
  #7  
Old 05-10-2022, 07:31 PM
David Paule David Paule is offline
 
Join Date: Dec 2009
Location: Boulder, CO
Posts: 5,300
Default

Electric outlets at just above workshop height, located every 4' or 5' apart, all around all the walls. Extra outlets near the large door.

Dave
Reply With Quote
  #8  
Old 05-10-2022, 07:47 PM
fl-mike's Avatar
fl-mike fl-mike is offline
 
Join Date: Jul 2005
Posts: 1,698
Default

Laugh if you must, but I love my workshop Roboroc robot vacuum. Cleans three nights a week. Corners, under the benches and shelves. Picks up the stripped wire insulation, errant rivets, the occasional cleco, and dust and dirt of course.

Hardly ever have to grab the broom or dust pan, or leaf blower! Keeps the shop floor tidy. Thinking about one for the hangar.

Been extremely impressed with Roboroc. (Repurposed the first house one to the shop)

Also, I used ArmorPoxy II job-on-a-pallet floor coating. Comes with pretty much all you need to do a real epoxy floor. I went light gray, no flakes! (part hiders) Expensive, but good stuff.
https://armorpoxy.com/products/job-p...-ii-per-sq-ft/
Attached Thumbnails
Click image for larger version

Name:	image_2022-05-13_124334447.png
Views:	69
Size:	526.3 KB
ID:	25782  
__________________
Mike W
Venice, FL

N164WM RV-6A Slider/O-360/FP Sold 4/2022
N184WM (RV-8) Final stages. Titan IOX-370
N184P reserved (RV-8QB) Empennage

Last edited by fl-mike : 05-13-2022 at 10:43 AM. Reason: added floor coating
Reply With Quote
  #9  
Old 05-10-2022, 07:55 PM
johnbright's Avatar
johnbright johnbright is offline
 
Join Date: Aug 2010
Location: Newport News, Va
Posts: 440
Default full chip epoxy floor

AFAIK a full chip epoxy floor is the most durable.
__________________
John Bright, RV-6A, N1921R, at FWF
O-360, 8.5:1, vert sump, dual SDS EFI EM-5-F
Z101 as a template, links
Reply With Quote
  #10  
Old 05-11-2022, 07:43 AM
AviatorJ AviatorJ is offline
 
Join Date: Feb 2015
Location: Oklahoma City
Posts: 998
Default

I appreciate the input! I have a few things I need to add.
__________________
Justin
RV-10, N10JW
Flying since 2/14/2019
http://operationrv10.blogspot.com/
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 03:24 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.