VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 10-04-2021, 06:42 PM
subpar_bucker subpar_bucker is offline
 
Join Date: Oct 2016
Location: Cranberry Twp, PA
Posts: 54
Default Oil heater install question for 12iS

I finally got around to installing the REIFF oil heater. The original instructions are here:

https://www.vansaircraft.com/wp-cont...2016-10-17.pdf

I have a few questions for folks who have installed this in the 12iS configuration. First question has to do with the zip tie holes called out in the original instructions in step 2. The shape of the part to be drilled has changed (it's now a F-01201E-R-2). You can see the difference if you look at this update:

https://www.vansaircraft.com/wp-cont...2iS_29iS-U.pdf

on page 29iS/U-09. I know that there were some cracking issues with this part. I'm reluctant to drill any holes in it in order to insert zip ties to retain the oil heater wires. Any suggestions on how to deal with this issue?

Second issue is where to place the heater under the #1 cylinder. I made a video showing where I've taped it initially:

https://www.youtube.com/watch?v=uRN4NJ9c-mI

Any comments appreciated. In hindsight, gluing this in place before installing the engine might have been easier Trying to figure out the best place for effective heating as well as easy of epoxying it in place.
Reply With Quote
  #2  
Old 10-10-2021, 06:25 PM
subpar_bucker subpar_bucker is offline
 
Join Date: Oct 2016
Location: Cranberry Twp, PA
Posts: 54
Default

I talked to Van's support. They have not updated the install instructions for the 12iS, but they do recommend installing the engine block heater portion on the other side (#2 cylinder side) of the engine for the 12iS. If I'm happy with my results I'll post pictures when I'm done.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 10:15 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.