I am installing a Matco PVPV-D parking brake valve in my 14A just on top of the center support for the rudder pedals. Aircraft Specialties and TS Flightlines has a nice install doc with pictures (page 9). I'm using the stock brake lines, so I need a compression fitting coming out of the valve. I can use the standard 90 degree brass fittings that go on the master cylinders on the right side, but on the left I need to use a straight compression to NPT fitting.
Vans has the 90 degree fitting, but I can't seem to find a straight thru. I was pointed to a nice push to fit p-501 from Stein, but I talked to Stein today and he looked up the specs on it and it was limited to 150psi, so that was a no go. Anyone have a source for something that would work?
Jeff
Vans has the 90 degree fitting, but I can't seem to find a straight thru. I was pointed to a nice push to fit p-501 from Stein, but I talked to Stein today and he looked up the specs on it and it was limited to 150psi, so that was a no go. Anyone have a source for something that would work?
Jeff