I'm just about to paint the interior of my RV-8A. I've decided on going with a medium gray color using rattle cans. I've read the posts about gloss vs semi-gloss vs flat and have decided to go semi-gloss. I've narrowed it down to two very different finishes.
1. Rustoleum 7783 Pewter Gray in semi-gloss.
2. The hammered finish offered by Rustoleum (7214 Gray Hammered) looks very different from the standard monotone finishes. I know some of you have used this for your interiors. How do you like it? Is it holding up well? Was it difficult to apply with good results?
I'm getting good results with my rattle can primer painting. Any tips on applying the finish coat that may be different from what you did with rattle can primer? How does the finish paint go over the power coated parts - any special prep needed?
Thanks in advance for the help!
Al Thomas
N880AT
RV-8A QB (finishing kit)
1. Rustoleum 7783 Pewter Gray in semi-gloss.
2. The hammered finish offered by Rustoleum (7214 Gray Hammered) looks very different from the standard monotone finishes. I know some of you have used this for your interiors. How do you like it? Is it holding up well? Was it difficult to apply with good results?
I'm getting good results with my rattle can primer painting. Any tips on applying the finish coat that may be different from what you did with rattle can primer? How does the finish paint go over the power coated parts - any special prep needed?
Thanks in advance for the help!
Al Thomas
N880AT
RV-8A QB (finishing kit)