Home > VansAirForceForums

-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

VAF on Twitter:

Prev Previous Post   Next Post Next
Old 06-04-2022, 11:20 AM
agent4573 agent4573 is offline
Join Date: Aug 2019
Location: Mountain view
Posts: 681

Originally Posted by Toobuilder View Post
We also need to understand that knock sensors in cars are required because they are trying to optimize timing and mixture to a very, very tight standard to meet fleet emissions standards. Our standard is much easier - do not knock. I have shown that the typical Lycoming running typical take off power mixture is very insensitive to timing retard. Put another way, you can back timing off far enough that you will never have to worry about detonation and retain essentially all of your take off performance - and you can do this open loop with a simple lookup table. This capability is available right now, today. Just give SDS a call.

OTOH, if you are really looking for that absolute corner case where you want to ride right on the edge of detonation reliably with a closed loop system, then please let us know what you find out. We will all benefit.
My main goal is to find out how 94UL affects detonation margin on an engine with 9:1 CR. Lycoming has only approved 8.5 or 8.7 CR engines for use on the new unleaded. I don't want to push the limits and run it on the edge. If I run back to back tests with 100LL and 94UL and keep advancing the timing until I hit initial detonation on each, I'll know how much extra timing to pull when running 94UL to have the same amount of margin. If 100LL starts to knock during the takeoff roll at 28 degrees advance, and 94UL starts to knock at 26, then I know I have to pull 2 degrees of timing out whenever I fill up with 94UL.

Larry, as far as getting parameters correct, I don't see it being that difficult. Fill one tank with 94 and the other with 100LL. Spend 30 minutes in the pattern to get everything at operating temps and do back to back takeoffs with the 2 fuels. I'm not trying to determine absolute knock margin, which would require having all the temps be super high. I just want to know the relative difference between the 2, which means the parameters only have to be the similar.
__________________ - out of date, will be updated soon
N69ER - built and flying - 2022 Bronze Lindy
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 06:58 AM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.