Same problem when hot
Originally Posted by Dennis Harm
Just wondering if anyone has had a stiff throttle movement the first 1/2 inch or so. I have the avstar fuel servo and Vans stock throttle cable. The stiffness is not in the cable as it was smooth before hooking up the throttle arm, thanks Dennis
FWIW, I now have the same problem, but only when the engine is hot. Ordered the straight arm today.
After looking at the geometry, I'm not sure why the kit did not include the straight arm to start with. The cable aligns directly with it and does not require a spacer as it does with the offset arm.
Bill Marvel, ATP, A&P/IA
Grand Junction, CO
RV-8A N751MB -1700 hours, sold
Zenith 801 sold
RV-14A 140134, N465MM - 845 hours and climbing
Dues paid every year