Originally Posted by RV10Man
When in config mode, I have green check marks in all the right boxes except "PTRIM". It just skips over this box while scrolling through the various points. It won't let me "click" on it.
If your system has a "PTRIM" entry in the Device List on the System Information page, it means you incorrectly enabled a pitch trim GSA 28 servo in the LRU configuration.
While you might have a typical pitch trim motor
in your plane, you probably are not using a separate GSA 28 servo
for pitch trim.
Make sure that both roll and pitch trim servos are disabled on this page.