Home > VansAirForceForums

-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

Old 07-21-2019, 08:20 AM
F1 Rocket F1 Rocket is offline
Join Date: May 2008
Location: Melboring, FL
Posts: 208
Default G3X/GSA 28/Ray Allen trim motor.

My wiring diagram (provided by Steinair) shows the Ray Allen trim motor wires as 2 conductor shielded connecting to pins 13-14 on the GSA 28 servo. Do these have to be shielded? This is a retrofit and the existing trim motor wires are in an unshielded 5 conductor cable that was supplied with the Ray Allen system. Same question regarding the position sensor wires that get connected to the GEA 24. These are also part of the original Ray Allen unshielded 5 conductor cable but are shown as shielded 3 conductor cable on my wiring diagram.
F1 Rocket #25
N14ZM "Dreamer"
Melboring, FL
Reply With Quote
Old 07-21-2019, 08:26 AM
Brantel's Avatar
Brantel Brantel is offline
Join Date: Mar 2006
Location: Newport, TN
Posts: 7,509

If installing new I would follow the guidance.

That being said, my plane was retrofitted a few times and none of my trim servo or position sensor wires are shielded and I have had zero issues.
Brantel (Brian Chesteen),
Check out my RV-10 builder's BLOG
RV-10, #41942, N?????, Project Sold
RV-7/TU, #72823, N159SB
Lyc. O-360 carbed, HARTZELL BA CS Prop, Dual P-MAGs, Dual Garmin G3X Touch
Track N159SB (KK4LIF)
Like EAA Chapter 1494 on Facebook
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 10:59 AM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.