VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 05-14-2012, 07:42 PM
tkatc's Avatar
tkatc tkatc is offline
 
Join Date: Nov 2007
Location: NJ
Posts: 1,747
Default TK's RV-8

I finally feel like a builder although I know I have just begun.

Workshop is just about done but I know it will forever be changing.


EAA workbenches on wheels!


Harbor Freight special!! Fabrication table.


Database!


And of course, stress relief!
__________________
My ATC opinion is NOT an official FAA recognized opinion, so any advice you get from me is ONLY my opinion.

Track my RV7A!!

Bought my flying -7A
Building an -8! (Fuse)
  #2  
Old 05-14-2012, 08:10 PM
tkatc's Avatar
tkatc tkatc is offline
 
Join Date: Nov 2007
Location: NJ
Posts: 1,747
Default

I got my tail kit a couple of weeks ago and the Russian helped my do inventory. He instructed me to debur everything before assembling anything.

So, here are all the parts (except for skins) deburred.


My first rivet!! The Russian came down to help with the first rivets. He says he wont build again but he was like a kid in a candy store. He couldn't wait to fire up the gun. So...he bangs home the first one!! Complete with a SMILEY , there goes my Lindy award!!


The rear HS spar is clecoed and ready.




__________________
My ATC opinion is NOT an official FAA recognized opinion, so any advice you get from me is ONLY my opinion.

Track my RV7A!!

Bought my flying -7A
Building an -8! (Fuse)
  #3  
Old 05-14-2012, 08:29 PM
SportAvServ SportAvServ is offline
 
Join Date: Jul 2006
Location: Ione, California
Posts: 265
Default Nice shop

Your way too organized, I'm sorry you will have to sit with the engineers at lunch. Did you get the fridge from a Norhwest Pilot? ;-)
  #4  
Old 05-14-2012, 10:22 PM
Jerry Cochran's Avatar
Jerry Cochran Jerry Cochran is offline
 
Join Date: Jan 2005
Location: Sherwood, Oregon
Posts: 981
Default

Where are all the parts, tools, and random c**p strewn all over the floor? I hope you don't think it's going to be pristine like that for more than a day???

Please don't be a neatnik and embarrass your fellows...

Did the Russian tell you to do do this?

.
__________________
Jerry Cochran
Sherwood, Oregon

RV-7a 707DD Bot from David Domeier 12/01/11
Lycoming IO-360 Catto 3 blade Panel upgrade in progress

RV6a 18XP 1st flite 03/21/07 sold to Dale Walter 10/22/2011
Superior IO-360, Hartzell Blended, GRT/Dynon

Happily "autopaying" DR

"Suppose you were an idiot, and suppose you were a member of Congress; but I repeat myself."

Mark Twain
  #5  
Old 05-15-2012, 04:45 AM
humptybump humptybump is offline
 
Join Date: Feb 2011
Location: USA
Posts: 3,167
Default

Congrats on getting your build underway!

... not sure how much longer the Jeep will warrant garrage space :-)

Last edited by humptybump : 05-15-2012 at 06:28 AM.
  #6  
Old 05-15-2012, 06:17 AM
tkatc's Avatar
tkatc tkatc is offline
 
Join Date: Nov 2007
Location: NJ
Posts: 1,747
Default

Trying to keep it as neat and organized as possible. I didn't realize how DIRTY deburring was going to be. Black greasy soot. Shavings of aluminum and wood everywhere. I wonder how long before one of the cars gets its first flat tire from aluminum shavings...

I also didn't realize how expensive builder assistance was going to be. Vlad helped me set 6 rivets and it cost me 2 quarts of Aeroshell, 1 Champion filter, an entire bag of BBQ chips and 1 beer. That comes out to approx $8 per rivet!!

Even Jay Pratt doesn't charge THAT much!
__________________
My ATC opinion is NOT an official FAA recognized opinion, so any advice you get from me is ONLY my opinion.

Track my RV7A!!

Bought my flying -7A
Building an -8! (Fuse)
  #7  
Old 05-15-2012, 06:23 AM
Vlad's Avatar
Vlad Vlad is offline
 
Join Date: Oct 2008
Location: Utah
Posts: 8,536
Default

Quote:
Originally Posted by Jerry Cochran View Post
Where are all the parts, tools, and random c**p strewn all over the floor? I hope you don't think it's going to be pristine like that for more than a day???

Please don't be a neatnik and embarrass your fellows...

Did the Russian tell you to do do this?

.

Jerry,
His neatness on the pictures is just for the show and desire to make it to VAF front page. He has all those fancy deburring tools and when he runs them thick dust clouds everything Jeep included. His shop is equipped with machinery enough to built a 737. Except somebody didn't send him promised dimple dies and he borrowed mine not aware of coming rental bill


Other then that, great job cousin! Smiley was made on purpose. BTW do you know you souppose to prime bare aluminum?
__________________
Не имей сто рублей, а имей сто друзей.
  #8  
Old 05-15-2012, 06:33 AM
Vlad's Avatar
Vlad Vlad is offline
 
Join Date: Oct 2008
Location: Utah
Posts: 8,536
Default

Quote:
Originally Posted by tkatc View Post

....
I also didn't realize how expensive builder assistance was going to be. Vlad helped me set 6 rivets and it cost me 2 quarts of Aeroshell, 1 Champion filter, an entire bag of BBQ chips and 1 beer. That comes out to approx $8 per rivet!!

Even Jay Pratt doesn't charge THAT much!

Now you multiply 14,000 rivets by 8 bucks and get a conservative estimate of your future Lindy winner
__________________
Не имей сто рублей, а имей сто друзей.
  #9  
Old 05-15-2012, 09:02 AM
aerhed aerhed is offline
 
Join Date: Dec 2008
Location: Big Sandy, WY
Posts: 2,567
Default

Typical oligarch. I think that russian needs to come west with the RV-1. Not sure I can afford his visit, but I could maybe buy him a beer in a 100yr old ghost town saloon
__________________
Actual repeat offender.
  #10  
Old 05-15-2012, 09:59 AM
humptybump humptybump is offline
 
Join Date: Feb 2011
Location: USA
Posts: 3,167
Default

Quote:
Originally Posted by tkatc View Post
Vlad helped me set 6 rivets and it cost me 2 quarts of Aeroshell, 1 Champion filter, an entire bag of BBQ chips and 1 beer. That comes out to approx $8 per rivet!!
I can save you some money - I don't eat BBQ chips.
Closed Thread


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 09:50 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.