VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 11-24-2013, 07:14 AM
SmittysRV's Avatar
SmittysRV SmittysRV is offline
 
Join Date: Aug 2005
Posts: 445
Default Gear brake assembly

Hi Guys,

I have finished the first part of the gear/brake assembly (left gear shown below). My question is whether the brake mounting plate is on right. I couldn't tell by the drawings which way it went on. From the pictures I seen from other builders websites, it looked like this was the correct setup. What do you think? Thanks in advance!



__________________
Smitty
Reply With Quote
  #2  
Old 11-25-2013, 10:10 AM
bruceh's Avatar
bruceh bruceh is offline
 
Join Date: Mar 2008
Location: Ramona, CA
Posts: 2,423
Default

Looks good. Eventually you will get to this:



I had to shim out the bracket on one side with some thin washers to give the required 1/16" clearance to the brake disc.
__________________
Bruce Hill
RV-9A N5771H flown over 800 hours!
http://www.overthehills.com/RV-9A-Project
APRS Tracking for KJ6YRP and New Flying Blog
2020 VAF donator
EAA Tech Counselor, Build assistance - canopy/tanks/fiberglass/electrical/repairs
Reply With Quote
  #3  
Old 11-25-2013, 06:06 PM
Mark C. Mark C. is offline
 
Join Date: Nov 2009
Location: Schaumburg
Posts: 119
Default

Thanks Bruce, I to used your picutures for help and orientation. The Vans prints were confusing to me.. Mark C. RV9A
Reply With Quote
  #4  
Old 11-26-2013, 04:06 AM
SmittysRV's Avatar
SmittysRV SmittysRV is offline
 
Join Date: Aug 2005
Posts: 445
Default

Thanks Bruce!
__________________
Smitty
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:52 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.