CD.
Active Member
I have a 7A with the old style W715 batwing tips. The paint has cracked a few inches in from the trailing edge tip. I think it may be because of some flexing due to a thin fiberglass area. I have the wingtip off working on my lights. The area is too restricted for access to add another layer of fiberglass. I have another similar finish crack behind the light pocket that I am going to add a fiberglass strip while the wingtip is off.
My question is.. can I just spray some of expanding foam down in that trailing edge tip to provide some internal support? Any reason why I shouldn't do that?
Thanks!
My question is.. can I just spray some of expanding foam down in that trailing edge tip to provide some internal support? Any reason why I shouldn't do that?
Thanks!