I sent my constant speed prop to Hartzell for overhaul. When it came back, I found that the black hub cap had been re-mounted/rotated such that the platenuts on my front spinner plate no longer line up with the front holes on my spinner.
Anybody run into this before? I'm going to have to order a new front spinner plate from Vans and drill it/mount platenuts to match my spinner unless there is a better solution. Can the hub cap be re-clocked to the right position? I probably should have marked it and the hub and told Hartzell to put it back on exactly the way it was.
LeRoy Johnston RV-6A "Esperanza" 1420 hours
Anybody run into this before? I'm going to have to order a new front spinner plate from Vans and drill it/mount platenuts to match my spinner unless there is a better solution. Can the hub cap be re-clocked to the right position? I probably should have marked it and the hub and told Hartzell to put it back on exactly the way it was.
LeRoy Johnston RV-6A "Esperanza" 1420 hours