I'm converting from an Icom 210 to Garmin GTR 200 and can't figure out the wiring conversion. I also have a PS Engineering intercom in the mix that I am trying to keep wired in.
I'm wondering if anyone has done this conversion and would know which current Icom 210 pin locations correspond to GTR 200 pin locations. Some locations are obvious like power and ground, but others not so much.
I originally purchased the wiring harness from Stein but they are apparently backed up months making harnesses. I'm not planning on stereo headsets because I believe I would need an entirely new wiring harness and I don't listen to music anyway.
Any help would be greatly appreciated.
Thanks,
Kevin
I'm wondering if anyone has done this conversion and would know which current Icom 210 pin locations correspond to GTR 200 pin locations. Some locations are obvious like power and ground, but others not so much.
I originally purchased the wiring harness from Stein but they are apparently backed up months making harnesses. I'm not planning on stereo headsets because I believe I would need an entirely new wiring harness and I don't listen to music anyway.
Any help would be greatly appreciated.
Thanks,
Kevin