View Single Post
  #2  
Old 07-25-2015, 08:34 AM
Kyle Boatright Kyle Boatright is online now
 
Join Date: Aug 2005
Location: Atlanta, GA
Posts: 4,431
Default

Measure the distance from the center of the axle nut to the valve stem. That gives you the dimension to offset the hole in the wheelpants from the screw hole where the pant attaches to the axle nut or axle nut spacer. I think I used 7/8" holes and plugs, but larger would make things easier.
__________________
Kyle Boatright
Marietta, GA
2001 RV-6 N46KB
2019(?) RV-10
Reply With Quote