View Single Post
  #8  
Old 01-27-2021, 11:22 AM
andoman andoman is online now
 
Join Date: Jul 2006
Location: Payson, AZ
Posts: 14
Default

See my setup here: https://photos.app.goo.gl/VxQfWdu713vJTggA8 (Edited the link: hope it works now...)
I welded up some CRMO tubing for the pedals.
Added a 2x2 1/8 in. thick angle to the floor as a mount. (Had to add a second 1x1 1/8 angle underneath to get the required stiffness.)
UHMW bearing blocks.
Swaged a cable to the main rudder cable.
Folds down a la Flyboy. Gives full rudder travel. Removes quickly. Zip ties hold the cable to the main rudder cable out of the way when pedal is removed.
I’m not sure why your formation instructor needs rudder pedals. Stick and throttle will do the job.

*edit* I have electric flaps. My setup may be not be compatible with manual flaps.
__________________
"The plane won't build itself..." RV-7A N7.62MM sold
-RV4 purchased. Extensive refurbishment almost complete.
HRII project: paint and panel to go!

Last edited by andoman : 02-07-2021 at 03:43 PM.
Reply With Quote