View Single Post
  #2  
Old 05-27-2008, 07:55 AM
skyyking56 skyyking56 is offline
 
Join Date: Jul 2006
Location: Rockford Illinois
Posts: 113
Default edge distance to center of hole

Hi Daniel,
I think that the edge distance is from the edge to the centerline of the hole.
I think standard is 2 times diameter, but there is a minimum of 1.5.
1.5 times .098=.147"
Pretty close to what you have there, but you will know it is there.
Your call,
Jim
7A wings
Reply With Quote