Thread: SDS EFI in 2021
View Single Post
  #9  
Old 03-01-2021, 08:49 AM
rv6ejguy's Avatar
rv6ejguy rv6ejguy is offline
 
Join Date: Mar 2005
Location: Calgary, Canada
Posts: 5,907
Default Updates

More FAB mounting plates with new milled reliefs for the aft facing vacuum fittings should be out of anodizing early this week so we can fill waiting orders soon.

I uploaded some new photos supplied by Tom at Flightlines showing their beautiful hose kits for SDS EFI equipped RV-14s. Look about halfway down this page: http://www.sdsefi.com/lycoming.htm for the NEW! graphic.

Thanks Tom

I've updated info for the IO-390 EXP119 engine throttle body size. Please let us know if you have one of these so we can supply the larger throttle body required.

We can now also supply 2.5 inch bolt spacing 60mm TBs used on some aft facing horizontal induction engines. Please measure your bolt spacing if you have an aft facing TB.
__________________

Ross Farnham, Calgary, Alberta
Turbo Subaru EJ22, SDS EFI, Marcotte M-300, IVO, Shorai- RV6A C-GVZX flying from CYBW since 2003- 445.9 hrs. on the Hobbs,
RV10 95% built- Sold 2016
http://www.sdsefi.com/aircraft.html
https://www.youtube.com/channel/UCiy...g2GvQfelECCGoQ



Last edited by rv6ejguy : 03-01-2021 at 08:52 AM.
Reply With Quote