View Single Post
  #5  
Old 03-09-2021, 08:44 AM
wirejock's Avatar
wirejock wirejock is online now
 
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 4,374
Default Grinder

I like the screw solution but I use a dremel with a grinding wheel. Spin it up on a coarse grinding wheel and dress the business end to the correct shape. Usually I make the countersink shallow then perfect it with a cutter set to the correct depth.
Reason is fiberglass is hard of steel tools.
__________________
Larry Larson
Estes Park, CO
http://wirejockrv7a.blogspot.com
wirejock at yahoo dot com
Donated 01/01/2021, plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
Empennage, wings, fuse, finishing kit, now FWF
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote