DavidFrangos
I'm New Here
I am in the process of adding a garmin gtp 59 oat probe on a composite aircraft. The g3x manual states it needs to be mounted where there is significant wire mesh in the airframe.
I planned to I stall it next to the wheel well but the structure is only composite. Does it need a metal plate? Or a ground plane? Or can I drill a hole and install it directly through the fiberglass?
Thanks!
I planned to I stall it next to the wheel well but the structure is only composite. Does it need a metal plate? Or a ground plane? Or can I drill a hole and install it directly through the fiberglass?
Thanks!