View Single Post
  #2  
Old 11-26-2011, 10:06 PM
vmirv8bldr's Avatar
vmirv8bldr vmirv8bldr is offline
 
Join Date: Jun 2005
Location: Eastvale, CA
Posts: 378
Default Pictures

This may help explain what I'm seeing...

I checked my engine mount at the fuselage and it is symmetrical and centered. All bolts are torqued. 2.5" prop extension is installed as required by the SJ cowl for the RV-8.







In the pic below, I used a long level to extend the fuselage forward to the engine and then measured these values from the edge of the level to the center of the valve cover of each cylinder.






__________________
Bart Filipiak
Eastvale, CA
RV-8 N74VB

Barrett IO-390
WW200RV
FLYING!!!!!!!
Reply With Quote