Having trouble getting my VOR/ILS antenna showing signal on my GTN650.
The setup is flat antenna in the copilot side wingtip. BNC cable directly from the antenna (ring terminal connectors) to the back of the gtn650 (bnc connector).
It could be
1. The Antenna itself
2. The BNC cable run or connections
3. A menu item in the gtn650
I have checked the connections on the antenna and they are tight and solid. The cable was continuity tested when installed.
There is no signal when I try to tune a VOR or catch an ILS. Its not intermittent signal, its just no signal at all. The GTN 650 works perfectly for RNAVs and other gps navigation.
Open to any input someone may have for where and how to troubleshoot any aspect of this system. Particularly, I am wondering if there is a gtn650 menu item that needs to be selected or something simple like that - maybe the g3xpert can weigh in?
Thanks for any assistance or ideas you have. Its in the hands of the braintrust now - no problem stands a chance there!
Tim
The setup is flat antenna in the copilot side wingtip. BNC cable directly from the antenna (ring terminal connectors) to the back of the gtn650 (bnc connector).
It could be
1. The Antenna itself
2. The BNC cable run or connections
3. A menu item in the gtn650
I have checked the connections on the antenna and they are tight and solid. The cable was continuity tested when installed.
There is no signal when I try to tune a VOR or catch an ILS. Its not intermittent signal, its just no signal at all. The GTN 650 works perfectly for RNAVs and other gps navigation.
Open to any input someone may have for where and how to troubleshoot any aspect of this system. Particularly, I am wondering if there is a gtn650 menu item that needs to be selected or something simple like that - maybe the g3xpert can weigh in?
Thanks for any assistance or ideas you have. Its in the hands of the braintrust now - no problem stands a chance there!
Tim