Thread: 430W to 650
View Single Post
Old 09-01-2015, 04:48 PM
Jesse's Avatar
Jesse Jesse is offline
Join Date: May 2005
Location: X35 - Ocala, FL
Posts: 3,711

Originally Posted by Raymo View Post
The 430 has one high density connector and two standard density connectors. I don't know what the 650 has.

No need to "cut" the connectors off the 430. Just de-pin (after labeling) and re-pin for the 650 as needed.
Actually, the 430 has 2 high density connectors with pins (male) in the back shell with an optional third of the same kind, then one standard density female connector. I'm not sure what goes in the female connector, but I'm pretty sure it's the audio connector.
Jesse Saint
Reply With Quote