I've see this question floating around all the forums and have ignored most of the discussions until today. After having re-read many of the "mismatched wing tip" threads I wanted to ask the -14 crowd about tolerances.
Both my tips are 1/4 inch above the aileron and flap reflex position. The rigging on everything has been near perfect until today. In fact it wasn't until the nut plate installation was finished that I noticed both tips were slightly (1/4 inch) above the flap/aileron line.
I'm torn about cutting the TE open and creating the perfect alignment over seeing what the actual flight conditions might show with my 1/4 inch off alignment. Since both are nearly identical my gut is saying leave alone until we see what happens in flight...but I'd like to hear what other folks have experienced.
Both my tips are 1/4 inch above the aileron and flap reflex position. The rigging on everything has been near perfect until today. In fact it wasn't until the nut plate installation was finished that I noticed both tips were slightly (1/4 inch) above the flap/aileron line.
I'm torn about cutting the TE open and creating the perfect alignment over seeing what the actual flight conditions might show with my 1/4 inch off alignment. Since both are nearly identical my gut is saying leave alone until we see what happens in flight...but I'd like to hear what other folks have experienced.