Thread: Fitting Wings
View Single Post
  #9  
Old 09-04-2012, 09:34 PM
RV8MW RV8MW is offline
 
Join Date: Jan 2007
Location: CLINTON,NC
Posts: 109
Default
Mark,
I checked mine tonight and I had marked and drilled ten holes on each side. That was every other rivet location. I then drilled two more at the aft end.Hope this helps.
__________________
MIKE WARREN
RV8 N184MW RESERVED
TMX-IO360 REDGOLD,HARTZELL CS
CLINTON N.C.
www.mykitlog.com/mwarren
Reply With Quote