View Single Post
  #7  
Old 08-20-2020, 09:56 PM
riobison riobison is offline
 
Join Date: Jul 2011
Location: Oliver BC & Red Deer Alberta Canada
Posts: 378
Default

Just after I bought my RV 4 I blew a hole in the plastic line just above where it joined on the gear leg.

First thing I did on the pressure side is replaced the all the plastic lines with Teflon lines.

If it had happened during roll out, it could have been a lot worse.

Lots of stuff on the forums on those lines failing.

Tim
Reply With Quote