View Single Post
Old 09-12-2021, 03:28 PM
RV701775 RV701775 is offline
Join Date: Jul 2019
Location: Boston, MA
Posts: 94
Default E-921 Gusset Drilling

Does anyone remember how they drilled the E-921 gussets on page 09-08 of the plants. If I try to drill from the inside into the forward spar, the other cleco holding the gussett is in the way, even with an angle drill. If I try to drill from the spar side, the root rib is in the way due to the angle.

I guess that I could just drill the spar holes without it being assembled.

Reply With Quote