View Single Post
  #16  
Old 09-23-2021, 03:41 PM
fr0gpil0t fr0gpil0t is offline
 
Join Date: Apr 2013
Location: Colorado Springs
Posts: 74
Default

I wanted to follow up and thank you everyone for their help - so far I think I have been successful.

Cleaned the fitting and gear leg careful, applied loctite 567 and put the fitting in hand tight. Then using a crowsfoot wrench and a medium length handle, tuned it smoothly just under 1.5 turns to the exact position, careful not to back off the fitting. Left the fitting 48 hours+ before adding brake fluid.

I think the difference between previous attempts was going a little tighter and not backing off the fitting to clock it. No leaks so far.

Robert
Reply With Quote