View Single Post
  #222  
Old 12-31-2017, 12:30 PM
rvbuilder2002's Avatar
rvbuilder2002 rvbuilder2002 is offline
 
Join Date: Jul 2005
Location: Hubbard Oregon
Posts: 9,666
Default

Quote:
Originally Posted by John-G View Post
Jim-

Thinking about it Dale is probably right about 8mm being the size for the hex socket needed and it is in the HF hex set.
I am also remembering 8mm
What works really well is to purchase just an 8mm ball end allen wrench and cut of the short "L" leg and insert it into a socket.
That gives you an approx 4" long skinny extension beyond your socket.

BTW, only the very first cooling shrouds produced required modification to access the upper left bolt. Any produced in ~2009 and later will require no modification.
__________________
Opinions, information and comments are my own unless stated otherwise. They do not necessarily represent the direction/opinions of my employer.

Scott McDaniels
Hubbard, Oregon
Van's Aircraft Engineering Prototype Shop Manager
FAA/DAR
RV-6A (aka "Junkyard Special ")
Reply With Quote