New builder question.
Working on adding electric rudder trim. I've never routed any wires or conduit and wondering what the best/most correct way to do it might be.
I'm in the planning stages so any advice is appreciated. I was leaning towards running conduit so I don't have to worry about selecting wires, connectors, etc. now since i haven't done that research yet. I have attached a picture with some of the parts to get an idea of what I'm looking at.
So to summarize:
1. Conduit or just run wires?
2. What routing should I take in the rudder?
3. How do I connect said conduit/wires securely to the rudder?
I have ideas and I've done plenty of googling but I haven't been able to find specific enough information that makes me comfortable i'm on the right track.
Thanks for any help.
-Bryan
Working on adding electric rudder trim. I've never routed any wires or conduit and wondering what the best/most correct way to do it might be.
I'm in the planning stages so any advice is appreciated. I was leaning towards running conduit so I don't have to worry about selecting wires, connectors, etc. now since i haven't done that research yet. I have attached a picture with some of the parts to get an idea of what I'm looking at.
So to summarize:
1. Conduit or just run wires?
2. What routing should I take in the rudder?
3. How do I connect said conduit/wires securely to the rudder?
I have ideas and I've done plenty of googling but I haven't been able to find specific enough information that makes me comfortable i'm on the right track.
Thanks for any help.
-Bryan