View Single Post
  #4  
Old 06-29-2022, 07:29 AM
lr172 lr172 is online now
 
Join Date: Oct 2013
Location: Schaumburg, IL
Posts: 7,715
Default

Quote:
Originally Posted by scsmith View Post
I Of course there is no way to put the prop into full coarse pitch statically to verify the clearance. I am kinda worried that the prop could hit.
?
Are you sure about that? When I was shapping the spinner backplate block off plates, I used two 1x2 boards clamped on to the blade and pulled them into the coarse position. It is just a spring holding them in the fine position, albeit a pretty strong spring. Was trying to do it by hand without the boards and couldn't so called Hartzel and they laughed and said you need the boards for leverage and was the typical method for achieving what I was doing.

Can't speak to the WW, but expect the same.

Larry
__________________
N64LR - RV-6A / IO-320, Flying as of 8/2015
N11LR - RV-10, Flying as of 12/2019

Last edited by lr172 : 06-29-2022 at 07:34 AM.
Reply With Quote