mikehoover
Well Known Member
Just drilled my elevator horns and am preparing to mount the HS/Elevators on the fuse hopefully within the next week. I noticed that the left elevator seems to be about 3/8"-1/2" lower than the right one at the trailing edge; really noticeable when I clamp a long piece of angle on the trailing edge of the right elevator and it hangs over the top of the left elevator. The elevator counterbalances are clamped to the HS so they are in proper position even with the HS. Has anyone had this happen? How can they be off this much, or is this typical? Thanks!
Mike
Mike