rjarrell
Member
Need help/answers with my winglet installation for RV-14 build. Using the W-00026 (aileron neutral position template), from RV-14 plans 23-10 4/15/19 rev. 0, my tips come out 1/2 below the aileron. verified the template with my RV-10 built in 2014 and the manufacturing hole location. Also pulled a wingtip and it fits in the -14 wing or would with very little adjustment. FYI I have spoken to Damien at Aveo, Kevin at Vans (build assist) and previously added to another thread with no response.
Damien says he has sent out over 50 of these (not sure if they were -10 or -14's or the count of each) and has heard no complaints. Van's has no idea what going on but was very nice and would be interested is an answer also. All I see posted are pics of opening the boxes containing these tips no actual installations.
Any help, pics recommendation would be greatly appreciated (I'm married so don't worry about seeing a mistake I made and hurting my feelings). Thanks in advance.
ZipTip more than 1/2" off
Right ZipTip with W-00026 in place
Right wingtip
Right wingtip bottom
Right straight edge
Left wingtip
Left with W-00026
Comparing RV-10 (blue) and RV-14 (white) ZipTips
RV-10 ZipTip matched to RV-14 wing
Bracket on RV-10
Damien says he has sent out over 50 of these (not sure if they were -10 or -14's or the count of each) and has heard no complaints. Van's has no idea what going on but was very nice and would be interested is an answer also. All I see posted are pics of opening the boxes containing these tips no actual installations.
Any help, pics recommendation would be greatly appreciated (I'm married so don't worry about seeing a mistake I made and hurting my feelings). Thanks in advance.
ZipTip more than 1/2" off
Right ZipTip with W-00026 in place
Right wingtip
Right wingtip bottom
Right straight edge
Left wingtip
Left with W-00026
Comparing RV-10 (blue) and RV-14 (white) ZipTips
RV-10 ZipTip matched to RV-14 wing
Bracket on RV-10
Last edited: