Hello,
We released G3X Touch Version 8.72 to the software download area today. Please note from the list at the bottom that many system LRU's have new software. After updating the software in the PFD1 with the SD card, the display will reset, and at that time it is best to hold down on the Menu button while it starts up in Configuration mode. Go to the System Information page on the PFD1 and watch all devices completing the software update before taking the PFD1 out of configuration mode and verifying proper operation for the updated system.
There are a number of new features included in this update, as well some behind the scenes improvements to improve system function and reliability.
• Includes new GMA 245 software which resolves Bluetooth connectivity issues seen in some installations.
• Adds support for 2 additional FIS-B Weather Products, Graphical AIRMETS, and Center Weather Advisory. These are only available over a Bluetooth connection at this time. Serial datapath support will be included for these 2 newer products in addition to several others in a future update.
• A new EIS configuration setting can be found by selecting the Display menu in Configuration Mode. EIS / Engine Page Layout affects the behavior of the EIS Strip. When set to Combined the EIS Strip will remain dynamic, and the layout of the strip will vary based on whether or not the ENG tab is open. This is consistent with the way the system has operated in the past. If the setting is toggled to Separate, the EIS Strip Layout remains unchanged and does not respond to the presence of the ENG Menu. The system will default to Combined upon the completion of the software update.
PFD EIS Strip Display, ENG Menu Closed
PFD EIS Strip, ENG Menu Open, EIS / Engine Page Layout set to Combined
PFD EIS Strip, ENG Menu Open, EIS / Engine Page Layout set to Separate
This is a link to our G3X Touch Manuals page, you can find the most recent revisions of the Pilot's Guide and Installation Manual here for reference, as well as several other helpful links.
Add support for Kavlico P4055-150G and P4055-5020-4 fuel pressure sensors
Add option to prevent EIS layout from changing when Engine page is visible
Add support for FIS-B Center Weather Advisories and Graphical AIRMET
Improve GTX 23/33 configuration interface
Improve fuel timer and fuel alarm
General improvements to system operation
Includes update to G5 software version 6.75
Includes update to GAD29 software version 3.30
Includes update to GMA245 software version 2.80
Includes update to GMU11 software version 2.10
Includes update to GPS20A GPS software version 2.10
Includes update to GSU25/B software version 4.20
Includes update to GSU25C/D software version 2.50
Includes update to GSU73 IGRF database version 1.04 (Base Year 2020)
Includes G5 boot block software version 2.20
Includes GAD13 software version 2.00
Includes GAD13 boot block software version 2.00
Includes GAD27 software version 2.40
Includes GAD27 boot block software version 2.30
Includes GAD29 boot block software version 3.10
Includes GDL39 software version 4.91
Includes GDL5x software version 2.14
Includes GEA24 software version 3.70
Includes GEA24 boot block software version 2.20
Includes GI260 software version 2.80
Includes GI260 boot block software version 2.20
Includes GMA245 audio software version 2.20
Includes GMA245 Bluetooth software version 2.00
Includes GMA245 boot block software version 2.30
Includes GMC507 software version 2.90
Includes GMC507 boot block software version 2.30
Includes GMU11 boot block software version 2.00
Includes GPS20A software version 2.40
Includes GPS20A boot block software version 2.10
Includes GSA28 software version 4.70
Includes GSA28 boot block software version 2.20
Includes GSU25/B boot block software version 2.20
Includes GSU25C/D boot block software version 2.00
Includes GSU73 software version 3.80
Includes GTR20/200 software version 3.30
Includes GTR20/200 boot block software version 2.30
Includes timezone database version 24.00
Please let us know if you have any questions!
Thanks,
Justin
We released G3X Touch Version 8.72 to the software download area today. Please note from the list at the bottom that many system LRU's have new software. After updating the software in the PFD1 with the SD card, the display will reset, and at that time it is best to hold down on the Menu button while it starts up in Configuration mode. Go to the System Information page on the PFD1 and watch all devices completing the software update before taking the PFD1 out of configuration mode and verifying proper operation for the updated system.
There are a number of new features included in this update, as well some behind the scenes improvements to improve system function and reliability.
• Includes new GMA 245 software which resolves Bluetooth connectivity issues seen in some installations.
• Adds support for 2 additional FIS-B Weather Products, Graphical AIRMETS, and Center Weather Advisory. These are only available over a Bluetooth connection at this time. Serial datapath support will be included for these 2 newer products in addition to several others in a future update.
• A new EIS configuration setting can be found by selecting the Display menu in Configuration Mode. EIS / Engine Page Layout affects the behavior of the EIS Strip. When set to Combined the EIS Strip will remain dynamic, and the layout of the strip will vary based on whether or not the ENG tab is open. This is consistent with the way the system has operated in the past. If the setting is toggled to Separate, the EIS Strip Layout remains unchanged and does not respond to the presence of the ENG Menu. The system will default to Combined upon the completion of the software update.
PFD EIS Strip Display, ENG Menu Closed
PFD EIS Strip, ENG Menu Open, EIS / Engine Page Layout set to Combined
PFD EIS Strip, ENG Menu Open, EIS / Engine Page Layout set to Separate
This is a link to our G3X Touch Manuals page, you can find the most recent revisions of the Pilot's Guide and Installation Manual here for reference, as well as several other helpful links.
Add support for Kavlico P4055-150G and P4055-5020-4 fuel pressure sensors
Add option to prevent EIS layout from changing when Engine page is visible
Add support for FIS-B Center Weather Advisories and Graphical AIRMET
Improve GTX 23/33 configuration interface
Improve fuel timer and fuel alarm
General improvements to system operation
Includes update to G5 software version 6.75
Includes update to GAD29 software version 3.30
Includes update to GMA245 software version 2.80
Includes update to GMU11 software version 2.10
Includes update to GPS20A GPS software version 2.10
Includes update to GSU25/B software version 4.20
Includes update to GSU25C/D software version 2.50
Includes update to GSU73 IGRF database version 1.04 (Base Year 2020)
Includes G5 boot block software version 2.20
Includes GAD13 software version 2.00
Includes GAD13 boot block software version 2.00
Includes GAD27 software version 2.40
Includes GAD27 boot block software version 2.30
Includes GAD29 boot block software version 3.10
Includes GDL39 software version 4.91
Includes GDL5x software version 2.14
Includes GEA24 software version 3.70
Includes GEA24 boot block software version 2.20
Includes GI260 software version 2.80
Includes GI260 boot block software version 2.20
Includes GMA245 audio software version 2.20
Includes GMA245 Bluetooth software version 2.00
Includes GMA245 boot block software version 2.30
Includes GMC507 software version 2.90
Includes GMC507 boot block software version 2.30
Includes GMU11 boot block software version 2.00
Includes GPS20A software version 2.40
Includes GPS20A boot block software version 2.10
Includes GSA28 software version 4.70
Includes GSA28 boot block software version 2.20
Includes GSU25/B boot block software version 2.20
Includes GSU25C/D boot block software version 2.00
Includes GSU73 software version 3.80
Includes GTR20/200 software version 3.30
Includes GTR20/200 boot block software version 2.30
Includes timezone database version 24.00
Please let us know if you have any questions!
Thanks,
Justin